ICP DAS USA GW-7552-B User Manual page 58

b. Load from file：Load a safe value setting from the file.
c. Load from device：Load a safe value setting from the GW-7552-B /
GW-7552-M.
3. View =>
a. Space configuration in device：Display memory address configuration
of select module in the GW-7552-B / GW-7552-M.
b. Space configuration in profibus：Display memory address
configuration of select module in Profibus master station.
c. Space configuration in modbus：Display memory address
configuration of select module in the Modbus.
4. Help =>
a. About Utility：Show about version of the utility.
5.2.2 Com Port settings：
1. Port: Com1~Com8
2. Baud rate: 2400/4800/9600/19200/38400/57600/115200
3. Parity: None/Odd/Even
4. Data bit: 8 data bit
5. Stop bit: 1 stop bit
5.2.3 Module state：
It can display the number of modules in the GW-7552-B / GW-7552-M and
display module parameters in the window of the module parameter by click the
module‟s ICON.
5.2.4 Module parameters：
Display module parameters of the GW-7552-B / GW-7552-M.
5.2.5 Connection status of device and com port：
Module state：Display connection status between the utility and the GW-7552-
Com Port state：Display state of the PC‟s com port. The green color means
5.2.6 Status bar：
Display messages about Com Port connection、the GW-7552-B / GW-7552-M
connection and the progress of data transmission.
GW-7552-B / GW-7552-M PROFIBUS/MODBUS GATEWAY User Manual (Version 1.60, May/2017) PAGE: 58
B / GW-7552-M. The green color means connected and the red
color means disconnected.
Com Port is open and the red color means Com Port is close.