Advertisement
GW-7552-M
Congratulations! ········································
Thanks for purchasing the GW-7552-M module – designed for the slave
device of PROFIBUS DP protocol.。This Quick Start Guide will provide related
information which needed to get start with the GW-7552-M module.。Please
also consult the user manual for detailed information on the setup and usage
of the GW-7552-M module.
What's in the Box! ······································
In addition to this guide, the package includes the following items:
Fieldbus
GW-7552-M
CD
Technical Support ······································
GW-7552-M Manual
CD:\profibus\gateway\GW-7552\Manual
ftp://ftp.icpdas.com/pub/cd/fieldbus_cd/profibus/gateway/gw-7552/manual/
GW-7552-M Website
http://www.icpdas.com/root/product/solutions/industrial_communication/fieldbus
/profibus/gateway/gw-7552.html
ICP DAS Website
http://www.icpdas.com/
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.
Screw
Quick Start
Drive
Quick Start
May 2017, Version 1.00
44 MM
CA-0910
DIN-Rail Clip
E-mail:
service@icpdas.com
M3x6L
Screw * 4
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ICP DAS USA GW-7552-M
Summary of Contents for ICP DAS USA GW-7552-M
- Page 1 Quick Start May 2017, Version 1.00 Congratulations! ········································ Thanks for purchasing the GW-7552-M module – designed for the slave device of PROFIBUS DP protocol.。This Quick Start Guide will provide related information which needed to get start with the GW-7552-M module.。Please also consult the user manual for detailed information on the setup and usage of the GW-7552-M module.
- Page 2 Apperarance Description PROFIBUS 9-PIN female D-Sub LED Status Indicators(3)。 14-Pin screw terminal block Pin Assignments 14-pin screw terminal block Name Name ISODE Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com...
- Page 3 LED Indicator The GW-7552-M module provides three LED indicators, Including indicators for power status and connecting status. The following is an overview of the purpose and function of each LED indicator together with a description. LED Name LED Description...
- Page 4 A repeater has to be used to link the bus segments. DIP SWITCH Address Setting The GW-7552-M module can be set by using either the dip switch or by writing it directly to the EEPROM. The dip switch covers a range from 0 to 255. The valid address...
Need help?
Do you have a question about the GW-7552-M and is the answer not in the manual?
Questions and answers