Resetting The Zyxel Device; Using The Reset Button; Navigating The Web Configurator; Figure 2 Password Screen - ZyXEL Communications P-660W-Tx User Manual

Chapter 2 Introducing the Web Configurator

Figure 2 Password Screen

6 It is highly recommended you change the default password! Enter a new password
between 1 and 30 characters, retype it to confirm and click Apply; alternatively click
Ignore to proceed to the main menu if you do not want to change the password now.
Note: If you do not change the password at least once, the following screen appears
every time you log in.

Figure 3 Change Password at Login

7 You should now see the Site Map screen.
Note: The ZyXEL Device automatically times out after five minutes of inactivity.
Simply log back into the ZyXEL Device if this happens to you.

2.1.2 Resetting the ZyXEL Device

If you forget your password or cannot access the web configurator, you will need to use the
RESET button at the back of the ZyXEL Device to reload the factory-default configuration
file. This means that you will lose all configurations that you had previously and the password
will be reset to "1234".

2.1.2.1 Using the Reset Button

1 Make sure the POWER LED is on (not blinking).
2 Press the RESET button for ten seconds or until the POWER LED begins to blink and
then release it. When the POWER LED begins to blink, the defaults have been restored
and the ZyXEL Device restarts.

2.1.3 Navigating the Web Configurator

The following summarizes how to navigate the web configurator from the Site Map screen.
32
P-660W-Tx v2 User's Guide