Handling Precautions - NTT docomo P-06C STYLE Series Instruction Manual

Where it is used
Label (Battery compartment)
Inner cover inside the back cover
1Seg Tip resin part
antenna
Metal part
(Bottom of the tip resin
part)
Metal part (Wire area)
Hinge area at bottom
part
Holder area
⿠Different materials may be used in some areas depending on the
body color.
※1 Body color "White" "Pink"
※2 Body color "Pink Gold"
Material/Finishing
Polyester
PC, Silicon rubber
ABS/UV coating
Stainless steel
Nickel-titanium alloy
Stainless steel
Zinc alloy/nickel plating

Handling Precautions

General notes
■The P-06C is provided with the waterproof performance,
however, do not have water entered into the inside of the
FOMA terminal, or do not spray water over accessories and
optional items.
The battery, adapter, desktop holder, and UIM are not
waterproofed. Do not use them in environments, which are high
in humidity such as in bathrooms, and do not allow them to get
wet from rain. Furthermore, if carrying them against your body,
they become moist due to perspiration and the internal parts may
become corroded, causing malfunction.
If the parts are found to have been damaged due to exposure to
the liquids, any repairs will not be covered by warranty, or repairs
may not be possible.
This may be repaired at a cost if repairs are possible.
■Use a dry soft cloth such as the one for cleaning glasses to
clean the equipment.
⿠The display may be scratched if it is rubbed hard with a dry cloth.
⿠Stains may result from droplets of water or dirt if they are left
on the display.
⿠Do not use alcohol, thinner, benzene, detergent or other
solvents for cleaning, otherwise the printing may be removed
or discoloration may result.
■Occasionally clean the terminals of the equipment using a dry
cotton swab, etc.
The soiled terminals deteriorate the connection and might cause
power discontinuity or incomplete charging. Wipe the terminals
with a cotton swab, etc.
Take care not to damage the terminals when cleaning them.
■Do not place the FOMA terminal near an air conditioner outlets.
Condensation may form due to rapid changes in temperature,
and this may corrode internal parts and cause malfunction.
15