NTT docomo P-06C STYLE Series Instruction Manual page 24

Table of Contents

Advertisement

③ Lightly push the FOMA terminal against a clean dry cloth, and
wipe moisture off the clearance gap of the microphone, earpiece,
speaker, keys, or hinges.
⿠Do not directly wipe moisture out of joint gap using a cotton swab,
etc.
④ Remove the back cover and wipe off any drops of water around
the inner cover and the rear surface of the back cover, and then
attach the back cover.
⿠Never open the inner cover.
⿠See page 20 for how to remove the back cover.
Rear surface of
back cover
⑤ Fully drain moisture and then operate the FOMA terminal.
⿠Even when you follow the procedures for draining water as
described above, moisture might remain in the FOMA terminal.
Therefore, use the FOMA terminal after allowing it to dry out
naturally. Also, take care to keep any objects you do not want to
get wet away from the FOMA terminal since water may leak out
22
from the FOMA terminal.
When Charging Battery
Accessories and optional items are not waterproofed. Check the
following before and after charging:
⿠Never charge the battery with the FOMA terminal left wet. If the
FOMA terminal gets wet, drain and wipe off moisture with a clean dry
cloth and then charge.
⿠When you charge the battery with the connector terminal cover open,
firmly close it after charging. To prevent water from entering inside
through the connector terminal, you are advised to use the desktop
holder provided for charging.
⿠Do not touch the AC adapter and desktop holder with your hands
wet.
⿠Do not use the AC adapter and desktop holder in a bathroom,
shower room, kitchen, and lavatory where water is used.
Around inner cover

Advertisement

Table of Contents
loading

Table of Contents