Connecting To Cable Modem - iCanTek iCanView 110 User Manual

iCanView110/110W User's Guide
3. Remove the crossover LAN cable and connect the iCanView110 to the network using
regular LAN cable. Check if you can receive video data when connecting to iCanView110 using
the viewer program.
When fixed IP address is assigned to the xDSL, follow the same way as assigning IP
address for the case of LAN using IP-installer. To enable the notification of the
changed IP address to the user over e-mail when the IP address is changed in
floating IP environment, you have to assign the e-mail address when user name and
password are
convenient way of connecting to your network camera under dynamic IP
environment. Please refer to the Application note regarding "Management
Server" in the CD.)
When connecting iCanView110 to xDSL Modem, usually regular LAN cable is
required. But since some xDSL Modems has crossover connections, please
contact your xDSL provider for detailed information.

3.3. Connecting to Cable Modem

1. Apply power and connect the PC and iCanView110 using crossover cable provided with the
system.
2. Setup network parameters by running "IP-Installer". {Refer to Figure 3-4}.
input using IP-installer. (Management server
Rev.1.4 (Jan. 2005)
provides a
17 of 56