User Admin & Time Setup - iCanTek iCanView 110 User Manual

iCanView110/110W User's Guide
5.6. User Admin & Time Setup
You can change the ID and password of users and also assign different attributes for each user.
You can change the ID and password of users and also assign different attributes for each user.
User Administration
Administrator
-
. Username : Admin ID. Default ID is "root"
. Password : Admin password. The default password is "dw2001".
. Confirm Password : Enter the password once more to confirm the password.
If you lost Administrator's ID and password, the only means of recovery is to
reset the settings to factory default, but then you lose your previous settings.
Figure 5-7. User Admin. & Time Setup
Rev.1.4 (Jan. 2005)
33 of 56