Basic Setup - iCanTek iCanView 110 User Manual

iCanView110/110W User's Guide

5.2. Basic Setup

Setup the basic parameters of the iCanView110.
Language Selection: You can select a language in the admin page.
- Supported languages : English, Korean, Japanese, Chinese, Spanish
System Name
It is the name of the iCanView110. It is same as the one set-up by IP-installer. You can
reassign the system name in admin mode.
Audio Input Selection
Select the type of input audio for each channel. Line In is used for connecting audio
-
output from audio devices. Mic is used for connecting the output of microphone.
Input Gain : Set the gain of the input audio.
-
Video Quality & Bandwidth Control
- Input Video : Select the analog video standard for input. Select one from NTSC, PAL, SECAM.
Figure 5-3. Basic Setup
Rev.1.4 (Jan. 2005)
23 of 56