Encryption Set Up - iCanTek iCanView 110 User Manual

iCanView110/110W User's Guide

5.11. Encryption Set up

For additional security to the video and audio data transmitted from the network camera, you can
set key codes and use them for encrypting the data from the network camera.
You can selectively activate encryption for the video and audio data. For enabling the encryption
check at the box at the left of the "Enable data encryption" then check at the proper check boxes at
the left of "Video" and "Audio". After the selection, click on SAVE button beneath the "Video" and
"Audio" check boxes.
Key Value : You can use up to 20 different key codes for the encryption of the data.
- Generation : To generate the key value click on "GENERATE" button. The boxes for the
Key values will be filled with new values.
- Saving Key value on the Video server: Click on SAVE button beneath GENERATE
button to save the key value generated by the network camera.
Figure 5-13. Encryption Setup
Rev.1.4 (Jan. 2005)
43 of 56