Table A 17: Warranted Characteristics Vertical System; Typical Characteristics - Tektronix 222PS Operator's Manual

Appendix E: Specifications
As stated above, this subsection lists only warranted characteristics.
A list of typical characteristics starts on page A 76.
Performance Conditions
The electrical characteristics found in these tables of warranted char
acteristics apply when the scope has been adjusted at an ambient
temperature between +15
ambient temperature within ±5
ibration was performed (unless otherwise noted).

Table A 17: Warranted Characteristics Vertical System

Name
Accuracy, DC Gain
(+15 to +35 C)
_
Accuracy, DC Gain
(Ambient Temperature
-15 to +15 C
_
and +35 to +55
Analog Bandwidth,
Repetitive Signal
Balance, DC
Balance, Invert
Input Current
Pulse Response Aberra
tions, Low Frequency
A 72
Description
±4%, valid when self cal performed within
±5 C of ambient temperature
_
±5%, valid when self cal performed within
±5 C of ambient temperature
_
C)
_
1
SEC DIV Setting
±0.2 divisions maximum trace shift between
VOLTS/DIV settings, valid when self cal per
formed within ±5
±0.4 divisions maximum trace shift between
inverted and non inverted displays, valid
when self cal performed within ±5
ambient temperature
2.5 nA maximum (0.5 divisions or less when
switching between DC and GND input coupling
with VOLTS/DIV set at 50 mV/div)
±3% maximum (0.15 divisions with a 5 divi
sion signal displayed)
C and +35 C and is operating at an
_ _
C of the temperature at which self cal
_
5
Hz or 10 MHz whichever
is less
C of ambient temperature
_
C of
_
Appendices