Table 1-3: Warranted Characteristics - Triggering System; Table 1-4: Power Requirements - Tektronix TDS 340A Technical Reference

Table 1–3: Warranted characteristics — triggering system
Name
Accuracy, Trigger Level, DC Coupled
Sensitivity, Edge-Type Trigger, DC
Coupled upled
Input Impedance, External Trigger
Maximum Input Voltage,
External Trigger
1
Net Offset = Offset – (Position Volts/Div). Net Offset is the voltage level at the center of the A-D converter dynamic
range. Offset Accuracy is the accuracy of this voltage level.
Table 1–4: Power Requirements
Name
Source Voltage and Frequency
Power Consumption
TDS 340A, TDS 360 & TDS 380 Technical Reference
Description
Trigger source
CH1 or CH2
External
External/10
Trigger source
CH1 or CH2
External
External/10
1 M 2% in parallel with 20 pF 2 pF
300 V (DC or AC) CAT II; derate at 20 dB/decade above 100 kHz to 13 V peak AC at
3 MHz and above
Description
90 to 132 VAC , continuous range, for 47 Hz through 440 Hz
RMS
132 to 250 VAC , continuous range, for 47 Hz through 63 Hz
RMS
65 Watts (120 VA)
Specifications
Sensitivity
1
(3% of |Setting – Net Offset
volts/div setting + Offset Accuracy)
(6% of |Setting| + 20 mV)
(6% of |Setting| + 200 mV)
Sensitivity
TDS 340A: 0.35 division from DC to 20
MHz, increasing to 1 div at 100 MHz
TDS 360: 0.35 division from DC to 50 MHz,
increasing to 1 div at 200 MHz
TDS 380: 0.35 division from DC to 50 MHz,
increasing to 1 div at 400 MHz
TDS 340A: 50 mV from DC to 20 MHz,
increasing to 150 mV at 100 MHz
TDS 360: 50 mV from DC to 50 MHz,
increasing to 150 mV at 200 MHz
TDS 380: 50 mV from DC to 50 MHz,
increasing to 500 mV at 400 MHz
TDS 340A: 500 mV from DC to 20 MHz,
increasing to 1.5 V at 100 MHz
TDS 360: 500 mV from DC to 50 MHz,
increasing to 1.5 V at 200 MHz
TDS 380: 500 mV from DC to 50 MHz,
increasing to 5.0 V at 400 MHz
| + 0.2 div
1–3