REMEHA Quinta Ace Installation, User And Service Manual page 30

6 Installation
Fig.17 Room-sealed version
L
Fig.18 Different pressure zones
L
=
Tab.16 Pipe reduction for each element used (parallel)
Diameter
45° bend
90° bend
Tab.17 Pipe reduction for each element used (concentric)
Diameter
45° bend
90° bend
30
=
AD-0000219-01
+
AD-0000114-01
90 mm 100 mm
1.3 m 1.4 m
4.5 m 4.9 m
100/150 mm
1.0 m
2.0 m
Room-sealed version (C
Connecting the flue gas outlet
Connecting the air supply
With a room-sealed version, both the flue gas outlet and the air supply
openings are connected (concentrically). Use adapters when using air
supply and flue gas outlet pipes with diameters other than 100/150 mm.
Tab.14 Maximum chimney length (L)
Diameter 100/150 mm
Quinta Ace 160
(1) Retaining the maximum chimney length, it is possible to use an extra 5 x
90º or 10 x 45º elbows.
Connection in different pressure zones (C
Connecting the flue gas outlet
Air supply connection
Combustion air supply and flue gas discharge are possible in different
pressure areas and semi-CLV systems, with the exception of the coastal
area. The maximum permitted height difference between the combustion
air supply and the flue gas outlet is 36 m.
Tab.15 Maximum chimney length (L)
Diameter 90 mm
Quinta Ace 160
(1) With retention of the maximum flue length it is possible to apply an extra 5
times 90º or 10 times 45º elbows.
Reduction table
110 mm 130 mm
1.5 m 1.0 m
5.4 m 1.8 m
130/200 mm
1.5 m
3.0 m
, C , C , C , C
13 33 43 63
130/200 mm
1 m 12 m
53
100 mm 110 mm
- - 9 m
150 mm 250 mm
1.2 m 2.0
2.1 m 3.5
150/220 mm
7625116 - v.04 - 17012017
)
93
150/220 mm
20 m
(1)
, C )
83
130 mm 150 mm
27 m 40 m
(1)
300 mm
2.4
4.2
1.5 m
3.0 m