Environmental Requirements; General Specifications - IBM 2109 Model M12 User Manual

Environmental requirements

General specifications

|
|
22
IBM TotalStorage SAN Switch: 2109 Model M12 User's Guide
Table 14 lists the environmental operating ranges for the 2109 Model C36 with
Model M12. The requirements for non-operating conditions are also provided for
acceptable storage and transportation environments.
Table 14. Environmental requirements
Condition Acceptable range during
operation
Temperature 0° - 40°C (40° - 104°F)
(See Note)
Humidity 20% - 80% RH noncondensing, at
40°C
Altitude 0 - 3 km (0 - 10 000 ft) above sea
level
Shock 4G, 11 MS duration, half-sine
wave
Vibration 5G, 0 - 3 kHz at 1.0 octave per
minute
Heat dissipation
v 64 ports: 3690 BTU per hour
v 128 ports: 6700 BTU per hour
Note: Temperature measured at the air inlets on the blower assembly side of the chassis.
Table 15 lists the general specifications for the 2109 Model C36 with Model M12.
Table 15. General specifications
Specification
Configurable port types
EMI rating
System architecture
System processor
ANSI Fibre Channel protocol
Modes of operation
Fabric initialization
Acceptable range during
nonoperation
0° - 40°C (40° - 104°F)
0% - 90% RH noncondensing, at
40°C
0 - 12 km (0 - 39 370 ft) above sea
level
0G, 11 MS duration, sq wave
10G, 0 - 5 kHz at 1.0 octave per
minute
Not applicable
Description
The 2109 Model C36 with Model M12
supports F_port, FL_port, and E_port
connections.
An operating 2109 Model C36 with Model
M12 conforms to the EMI radiation levels
specified by the following regulations:
v FCC Rules and Regulations, Part 15B,
Class A level
v CISPR22 Class A
v EN55022 Class A
v VCCI Class A ITE
v AS/NZS 3548 Class A
v CNS13438 Class A
v ICES-003 Class A
Nonblocking shared-memory switch
IBM Power PC 405GP, 200 MHz CPU
FC-PH (Fibre Channel Physical and
Signaling Interface standard)
Fibre Channel Class 2, Class 3, and Class F
Complies with FC-SW 5.0