Table of Contents
Advertisement
Environmental Requirements
This section describes the basic environmental requirements for the RackSwitch G8124.
Make sure the location where you install the switch meets the following requirements:
Install the switch unit in a dry, clean, well-ventilated area.
Provide adequate space on all sides of the switch unit, to ensure proper air flow.
Make sure that an adequate grounded power supply is within reach of the switch unit.
Make sure that twisted-pair cable is routed away from power lines, fluorescent lighting fixtures
and other sources of electrical interference.
Preventing Electric Shock
This product does not contain any user-serviceable parts. Do not remove the cover of this device.
The AC G8124 is designed to work with single-phase power systems that have a grounded neutral
conductor. To reduce the risk of electric shock, always plug the power cord into a grounded power
outlet.
20
BNT RackSwitch G8124 Installation Guide
Advertisement
Table of Contents
