IBM 2109 Model M12 User Manual page 14

Figure 1. Safety label on the 2109 Model M12
2. Verify that the linecord safety label shown in Figure 2 is installed on the power
Figure 2. Linecord caution label
3. Verify that the SFP label shown in Figure 3 and Figure 4 on page xiii is installed
Figure 3. SFP label (front view)
xii
IBM TotalStorage SAN Switch: 2109 Model M12 User's Guide
supply of the 2109 Model M12.
CAUTION:
This unit may have two linecords. To remove all power, disconnect both
linecords. (1)
PSU1 PSU2
> 240 V~
SJ000620
on the 2109 Model M12.
SJ000317