Set Zero Azimuth; Enable (Disable) High Power Standby And High Motor Torque - FLIR M-SERIES Operator's Manual

M-Series System Configuration
Effect of Twist-to-Pan on Puck Movement
TABLE 4.1
Puck Movement
Push Puck Left
Push Puck Right
Twist Counter Clockwise
Twist Clockwise
Push Puck In
Pull Puck Out

Set Zero Azimuth

The Azimuth "0" direction marked on the camera base should be directly toward the front of the
vessel; icons on the video show the direction the camera is facing in relation to an outline of a ship.
If the camera can not be installed pointing directly toward the front of the ship, the zero azimuth
can be set using this OSD menu selection.

Enable (Disable) High Power Standby and High Motor Torque

These two settings help you to manage power consumption:
High Power Standby controls whether power is supplied to the pan/tilt motors while the
camera is in the standby mode.
High Motor Torque controls the amount of power that is supplied to the pan/tilt motors while
the camera is in the powered on state.
Choosing the amount of power to use involves a trade-off between power consumption and the
ability of the gimbal assembly to hold the camera in place in rough seas. If the gimbal moves due
to shock or vibration, the camera may not be in line with the position indicator or may lose
precision regarding the home position.
Disabling High Power Standby may also affect camera readiness in a cold environment. When
High Power Standby is enabled and the motors are active, the unit stays closer to operating
temperature.
High power standby mode may be useful for power boats that operate at higher speeds and
experience high impact environments and can support higher power consumption.
When you select to enable or disable this setting, a prompts displays for you to confirm or cancel
the change. See Table 4.2 below for power consumption.
Power Consumption
TABLE 4.2
Camera State Camera Setting
Standby High Power Mode ON
High Torque Mode ON
Standby High Power Mode OFF
High Torque Mode ON
Standby High Power Mode ON
High Torque Mode OFF
432-0003-60-10 Version 100
Twist-to-Pan Enabled
N/A
N/A
Pan Counter Clockwise
Pan Clockwise
Zoom In
Zoom Out
Dual Payload
22 W
8 W
14.5 W
May 2017
Twist-to-Pan Disabled
Pan Counter Clockwise
Pan Clockwise
Zoom Out
Zoom In
N/A
N/A
Single Payload
17.4 W
7.4 W
13 W
30