FLIR M-SERIES Operator's Manual page 37

IP Interface and PC Operations
Help
At the top of the page, the Help menu shows software version information. This page has
information about the camera including hardware and software revision numbers, part numbers,
and serial numbers. If it is necessary to contact FLIR Technical Support for assistance, it will be
helpful to have the information from this page on hand.
Log out
Use this button to disconnect from the camera and stop the display of the video stream. If a web
session is inactive for 20 minutes, it will be stopped.
Toggle Camera/PC time
Use this button to view either the PC time or the camera time.
Camera Control and Status
In the lower left of the screen are two indicator lights: Control and Status. Initially the Control light is
off, indicating the user is not able to control the camera. When multiple users are connected to a
camera, only one user at a time can issue commands to the camera. If another user has control of
the camera, the Control light is yellow. Request control of the camera by clicking on the yellow or
black light, or simply by sending a command to the camera. The Status light may turn off
temporarily while waiting for the response from the camera. Be patient, there may be a slight delay
between each command while the browser waits for a response from the camera.
Web Control Panel
The control buttons on the page provide a way to control the camera in a limited number of ways.
When the mouse cursor is positioned over a button, a tool tip is displayed.
This same web interface is used with various FLIR thermal cameras—some are fixed and some
are pan/tilt cameras. As a result, different buttons in the control panel appear for different cameras.
IR Control Keypad
The functions of the buttons appearing for the M-Series cameras are described below:
OSD Menu
When selected, the keypad changes to an OSD menu control panel. The OSD menu is
shown on the IR video display. Select the Menu icon again or the back arrow to return to
the main keypad.
432-0003-60-10 Version 100
Surveillance Mode
On/Off
May 2017
Visible Control Keypad
37