FLIR M-SERIES Operator's Manual page 38

IP Interface and PC Operations
Use the OSD menu keypad to navigate through the OSD menus and make selections.
Refer to M-Series System Configuration, pg. 24
OSD Menu Keypad
Zoom In/Zoom Out
These buttons zoom the active camera (IR or daylight). Plus zooms the camera
in; minus zooms the camera out.
Toggle Palette - IR only
This button causes the camera to cycle through different look up table (LUT) color
palettes. Depending on the subjects viewed, one color palette may be preferable to the
others. The Toggle Polarity button allows access to the inverse palettes.
Toggle Low Light Mode - Visible only
This button causes the camera to enter or exit low light mode.
Toggle Video Source
This button changes the active between the IR camera and the daylight camera. When
the daylight camera is selected, only buttons that have a function on the daylight camera
are shown.
Home
Click moves the camera to the Home position; Click and Hold sets the current pan and tilt
position of the camera as the Home position.
Surveillance
This button starts surveillance mode. The camera will pan back and forth centered on the
direction the camera is pointing when the mode is started.
432-0003-60-10 Version 100
for descriptions of the menu functions.
OSD Menu Keypad
Return to Web menu
Move up through OSD
Exit current OSD function
Move left through OSD
Enter
Move right through OSD
Move down through OSD
May 2017 38