Home Button; Special Button Functions - FLIR M-SERIES Operator's Manual

M-Series Joystick Control Unit

HOME Button

Short Press
A short press of the HOME button moves the camera to its home position. The home
position is a programmable preset position—by default, straight ahead and level with
the horizon—that operators can use as a reference. Home is the position the camera
will most likely be in when it is in use.
Long Press
Pressing and holding the HOME button sets the home position. First use the puck to point the
camera's line of sight to the position you want to set as home. Press and hold the HOME button for
3 seconds; the home symbol will flash on the screen when the new home position is set.

Special Button Functions

You can use combinations of buttons to perform a few additional less common functions.
JCU Reset
Occasionally it may be necessary to reset the JCU. Simultaneously pressing and holding the
MENU and USER buttons causes the JCU to reset. Unplugging and plugging the Ethernet cable
will also cause the JCU to lose power temporarily and reset. When it resets, it will reacquire a
network IP address and display connection progress messages on the display.
Display IP Addresses
Press the COLOR button while pushing the puck, first the IP address of the JCU is shown on the
JCU screen, then the IP address of the camera is shown.
432-0003-60-10 Version 100 May 2017 16