thomann SePar QUAD LED RGB UV IR User Manual page 34

Operating
Dimming (SePar Quad RGB UV
IR)
Colour selection
Button Colour
0 Cyan
1 Purple
2 Pink
3 Yellow
4 White
Resetting to factory defaults
34
Press [Dimming]to adjust the brightness level of the primary colours. Press [R] (red), [G] (green),
[B] (blue) or [1] (UV) and use [+] and [–] to select a value between 0 and 255.
Use the coloured buttons to select a colour tone in any mode. The following assignment
applies:
Button
5
6
7
8
9
To reset the device, press [ON/OFF]to activate Blackout and then press [9], [8] , and [7]at the
same time.
LED-PAR
Colour Button
Magenta R
Light green G
Light blue B
Brown A
Warm white W
Colour
Red
Green
Blue
Amber
White