thomann SePar QUAD LED RGB UV IR User Manual page 27

1 Infrared sensor for receiving the signals from the remote control.
2 [Power In]
Panel plug (for non-heating apparatus) for mains cable with fuse holder Connect the device to a grounded power
outlet using the supplied power cable.
3 [DMX In]
DMX input
4 [Power Out]
Power supply socket (for non-heating apparatus) for the power supply of other devices.
5 [DMX Out]
DMX output
6 Display
7 [Up] | [Down]
Increases / decreases the displayed value by one.
8 [Setup]
Confirms a selected value.
SePar QUAD LED RGB UV IR, SePar QUAD LED RGBW
Connections and controls
27