thomann SePar QUAD LED RGB UV IR User Manual page 19

Options
DMX indicator
NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordi‐
nary microphone cables.
Never connect the DMX input or output to audio devices such as mixers or ampli‐
fiers.
You can install the device in either the hanging or standing position. During use, the device
must always be attached to a solid surface or to an approved support. Use the openings pro‐
vided on the two-piece bracket for attaching.
Always work from a stable platform whenever installing, moving or servicing the unit. In doing
so, the area underneath the device must be cordoned off.
The safety-rope must be attached to the bracket.
If the unit is in DMX mode and a DMX controller is connected and turned on, a dot on the
fourth digit of the display will flash. If the unit is in DMX mode, but without a turned on DMX
controller connected, the display will flash.
SePar QUAD LED RGB UV IR, SePar QUAD LED RGBW
Installation
19