Advertisement
Quick Links
Advertisement
Related Manuals for thomann STAIRVILLE LED UV-Cannon 50 W COB
Summary of Contents for thomann STAIRVILLE LED UV-Cannon 50 W COB
- Page 1 LED UV-Cannon 50 W COB UV par user manual...
- Page 2 Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 07.07.2020, ID: 403736 (V2)
-
Page 3: Table Of Contents
Table of contents Table of contents Safety instructions............................. 4 Features................................9 Installation..............................10 Connections and controls........................13 Technical specifications........................15 Cleaning............................... 17 Protecting the environment......................18 LED UV-Cannon 50 W COB... -
Page 4: Safety Instructions
Safety instructions Safety instructions Intended use This device is intended for use as an electronic lighting effect by means of LED technology. The device is designed for professional use and is not suitable for use in households. Use the device only as described in this user manual. Any other use or use under other operating con‐ ditions is considered to be improper and may result in personal injury or property damage. - Page 5 Safety instructions Safety DANGER! Danger for children Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit.
- Page 6 Safety instructions DANGER! Electric shock caused by short-circuit Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a registered electrician. WARNING! Eye damage caused by high light intensity Never look directly into the light source.
- Page 7 Safety instructions NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations. Only operate the device within the ambient conditions specified in the chapter ‘Technical specifications’...
- Page 8 Safety instructions NOTICE! Power supply Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure the user.
-
Page 9: Features
Features Features Powerful UV par as replacement for 400 W UV cannons. Special features of the device: 1 × UV COB LED, 50 W Beam angle: 110° Power cable (1.3 m) mounted on the unit Compact and lightweight design For technological reasons, the light output of LEDs decreases over their lifetime. This effect increases with higher operating temperature. -
Page 10: Installation
Installation Installation Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. - Page 11 Installation NOTICE! Risk of overheating The distance between light output and the illuminated surface must be more than 1.5 m (19.7in). Provide sufficient ventilation. The ambient temperature must always be below 40 °C (104 °F). NOTICE! Use of stands When mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand.
- Page 12 Installation Always work from a stable platform whenever installing, moving or servicing the unit. In doing so, the area underneath the unit must be cordoned off. The safety cable must be threaded through the safety cable eyelet on the rear side. UV par...
-
Page 13: Connections And Controls
Connections and controls Connections and controls LED UV-Cannon 50 W COB... - Page 14 Connections and controls 1 Mounting bracket. 2 Locking screws for the mounting bracket. 3 Fuse holder. 4 Power cable. Connect the device to the power supply to start operation. To turn off the power, unplug the power cord. 5 Safety cable eyelet. UV par...
-
Page 15: Technical Specifications
Technical specifications Technical specifications Light source 1 × UV COB LED, 50 W Optical properties Beam angle 110° Power consumption 60 W Supply voltage 100 – 240 V 50/60 Hz Fuse 5 mm × 20 mm, 3.15 A, 250 V, slow-blow Degree of protection IP20 Mounting options... - Page 16 Technical specifications Further information Type Battery operation UV par...
-
Page 17: Cleaning
Cleaning Cleaning Optical lenses Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the light output. The frequency of cleaning depends on the operating environment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device. -
Page 18: Protecting The Environment
Protecting the environment Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. - Page 20 Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de...