Table of Contents
Advertisement
User Manual
Problem
Communication
Web application
If you cannot solve the problem even after trying the points above, contact our information center.
Troubleshooting
The device is not recognized
correctly when it is connected
to a computer.
When communicating with a
computer, an error screen is
displayed and
communication stops.
Solution
Check the connection for the computer and the
cradle. Clean the contact points on the device and
the cradle.
U
"Performing After Care" on page 119
Perform a system reset.
U
"Resetting the System" on page 127
Do not move the device and the cradle during
communication. Avoid communicating data
under environments where static electricity can
be easily generated. If the same error occurs,
reconnect the cradle to start communication
again.
126
Advertisement
Table of Contents
