Epson SF-180 User Manual page 17

Table of Contents

Advertisement

User Manual
Measurement screen
Operation buttons
Button Operation
Short press
A
Long press (two
seconds or more)
Short press
B
Long press (two
seconds or more)
Short press
C
Long press (two
seconds or more)
Short press
D
Long press (two
seconds or more)
*
When you reset the display, it returns to the status before measuring started allowing you to start the next
measurement. Data that has been measured up to that point is stored in the device's memory.
Preparing and Basic Operations
You can display up to four measurement screens and switch the
screens using this button.
Displays the time screen.
Not available while measuring.
Turns the light on or off. The light turns on for approximately 10
seconds.
Displays the Measure set. menu.
Not available while measuring.
Starts, stops, or resumes measuring.
Displays the time screen.
Displays the time screen if you use reset* while measuring is stopped.
Not available while measuring.
Records laps while measuring.
Resets* while measuring is stopped.
Not available while resetting measurements.
17
Explanation

Advertisement

Table of Contents
loading

Table of Contents