Table of Contents
Advertisement
User Manual
Setting items
Contrast
Auto Sleep
AT Light
Alarm
Key Tones
Initialize
Software Version
Settings
Value
(4)
ON (default)
OFF
ON
OFF (default)
Tones (default)
Vib. (vibration)
Tones & Vib. (vibration)
OFF
ON (default)
OFF
-
-
Explanation
Set the contrast for the screen.
When you leave the device for a while, this function
automatically puts the device into sleep status.
Entering sleep status reduces the amount of power
consumption.
When the screen changes, this function automatically
turns on the light. When a specified time has passed, the
light automatically turns off.
Set the alarm type and time (1 to 10 minutes).
You can also set this from Measure set.
Turn on or off the operation tones.
Initializes all setting information (Comm. Settings, User
Settings, Sys. Settings and Measure set.) and stride
sensor information in the device's memory.
Measurement history data is also deleted.
Displays the firmware version information.
103
Advertisement
Table of Contents
