Uploading Measurement Data - Epson SF-180 User Manual

User Manual
Data Management Using the Web Application (RUNSENSE View)

Uploading Measurement Data

You can upload measurement data to the Web application (RUNSENSE View).
A
Connect the cradle to the computer on which Run Connect is installed with a USB
cable.
B
Place the device into the cradle.
Check that the contact points on the device are pointing up and match the contact marks on the cradle.
After placing the device into the bottom of the cradle, push carefully on the top of the device until it is fixed in
place.
c
Important:
Make sure the device is placed in the correct direction; otherwise, the device or the cradle could be damaged.
Start Run Connect.
75