Problem Solving - Epson SF-180 User Manual

User Manual

Problem Solving

Check each item.
Problem
Basic actions
Troubleshooting
The screen is not displayed.
The device does not react
even after performing an
operation.
The screen turns off or turns
blue during use
The clock turns off.
The time is not set correctly.
Measurement stops while
exercising.
Solution
You cannot start using the device immediately
after purchase until the device is charged. Charge
the device first. Also, nothing is displayed if the
battery runs out. Make sure you charge the battery
before use.
U
"Charging" on page 22
Is the battery running low? Charge the battery.
U
"About the Battery" on page 28
If the device does not operate after charging, try
resetting the system.
U
"Resetting the System" on page 127
Perform a system reset.
U
"Resetting the System" on page 127
When you leave the device for a while, it enters
sleep status and the time display turns off. This is
not a malfunction as the display is restored the
next time a button is pressed or you move the
device. If the display is not restored, the battery is
running low. Charge the device.
U
"Charging" on page 22
Also, if Auto Sleep is set to off, the clock does not
turn off.
U
"Sys. Settings" on page 102
Set "Time Adjust" from Sys. Settings.
U
"Sys. Settings" on page 102
If the hour is different, check the time zone and
daylight-saving time.
U
"Sys. Settings" on page 102
When exercising slowly, such as when walking, we
recommend turning off the AT Pause function.
U
"Automatically Start/Stop Measuring (AT
Pause Function)" on page 58
124