Epson SF-180 User Manual page 5

User Manual
Settings
Other features
Introduction
Allows you to change the settings for the device.
❏ Communicates with external devices (Communication function)
U
"Comm. Settings" on page 101
❏ Inverts the screen's display (Invert function)
U
"Sys. Settings" on page 102
❏ Adjusts the screen's contrast (Adjust contrast function)
U
"Sys. Settings" on page 102
❏ Turns on the light automatically when the screen changes (Auto Light function)
U
"Sys. Settings" on page 102
❏ Sets an alarm (Alarm function)
U
"Sys. Settings" on page 102
❏ Turns off operation tones (Operation Tones function)
U
"Sys. Settings" on page 102
❏ Resets configuration information in the device's memory (Initialize function)
U
"Sys. Settings" on page 102
❏ Supports the Quasi-Zenith Satellite System (QZSS).
U
"Supports the Quasi-Zenith Satellite System" on page 33
❏ You can measure pitch and stride using the built-in stride sensor.
U
"Educating Your Stride Sensor" on page 34
❏ You can skip GPS positioning if it is taking too long.
U
"Skipping GPS positioning" on page 31
❏ You can take measurements without performing GPS positioning.
U
"Indoor mode" on page 32
❏ You can manage recorded data using the dedicated Web application "RUNSENSE
View".
U
"Data Management Using the Web Application (RUNSENSE View)" on
page 68
5