Measuring By Setting The Time Or Distance - Epson SF-180 User Manual

User Manual
Measuring by Setting the Time or
Distance
c
Important:
❏ When performing GPS positioning, make
sure the screen is facing up and you are
outside with no obstructions overhead.
U
"Specifying a GPS (GPS Positioning)" on
page 30
❏ It usually takes less than two minutes to
complete GPS positioning.
If it takes more than two minutes and Failed
is displayed, we recommend selecting
Cancel, moving to a different location, and
trying again.
Operation buttons
Set the time or distance.
A
Display the measurement screen.
Press C on the time screen.
GPS positioning starts, and the measurement
screen is displayed once positioning is complete.
Measure
Note:
❏ You can skip GPS positioning if you want to
start measuring immediately or if it is taking
too long.
U
"Skipping GPS positioning" on page 31
❏ Use indoor mode when GPS positioning
cannot be performed because you are indoors
and so on.
U
"Indoor mode" on page 32
B
Displays the Measure set. menu.
Hold down B on the measurement screen.
C
Select Mode.
Use C/D to select, and then press A.
D
Select Goal.
Use C/D to select, and then press A.
E
Select whether to set time or distance.
Use C/D to select, and then press A.
52