Table of Contents
Advertisement
Epson Stylus Pro 9860
Transporting the printer
When you transport the printer, be sure to repack the
printer using the original box and packing materials.
Caution:
c
❏ When moving or transporting the printer,
keep it flat. Do not tilt it, stand it on end, or
turn it upside down. Doing so may cause the
ink to leak inside the printer. Also, proper
operation of the printer after moving or
transportation cannot be guaranteed.
❏ When transporting the printer, repack the
printer using the original box and packing
materials to protect it from shock and
vibration.
❏ When moving or transporting this product
equipped with the stand on an uneven surface,
lift the printer and carry it.
❏ When moving or transporting this product
equipped with the stand, check all the screws
for proper tightness on the stand afterward.
User's Guide
Maintenance
Setting up the printer after
transporting
The steps you need to take to set up the printer after
transporting it are almost identical to the steps carried
out the first time you set up the printer. When you set up
the printer again, refer to the Setup Guide.
A
Make sure that the place is proper.
See "Choosing a place for the printer" in the
Setup Guide
B
Plug in the power cable to the electrical outlet,
and turn on the printer.
See "Setting up" in the Setup Guide
C
Perform a nozzle check to see if there are any
missing dots.
See
"Nozzle check" on page 64
D
Perform the print head alignment to ensure print
quality.
See
"Print head alignment" on page 67
72
Advertisement
Table of Contents
