Cleaning The Printer; Cleaning Outside Of The Printer - Epson Stylus Pro 9860 User Manual

Epson Stylus Pro 9860
F
Set the number for #1 BK to #4 Y, and press the
button.
G
Press the / button to select BI-D
2-COLOR. Then press the
H
Check the pattern and select the set number that
has the smallest gaps.
I
When BI-D 2-COLOR #1 LC appears on the
LCD panel, press the
number, and then press the
J
Set the number for #1 LC to #4 LM, and then
press the button.
If you are not satisfied with the result of this
alignment, see the next section to try BI-D ALL.
After you set the patterns, press the
to return to the READY state.
Bi-D ALL alignment
A
Press the / button to select BI-D ALL, and
then press the
Note:
When you print the pattern on a cut sheet media,
you need to prepare several sheets. When the first
page is printed, set the next paper.
B
Check the pattern and select the set number that
has the smallest gaps.
C
When BI-D ALL #1 BK appears on the LCD
panel, press the
number, and then press the
D
Set the number for #1 BK to #4 M, and then press
the button.
User's Guide
Maintenance
button.
/ button to select the
button.
button
button to print a pattern.
/ button to select the
button.

Cleaning the Printer

To keep your printer in top operating condition, clean it
thoroughly if it becomes soiled.
Caution:
c
Take care to prevent water or other foreign matter
getting inside the printer. If moisture, dirt, or other
matter gets inside of the printer, besides affecting
print quality, it may cause the electric circuits to
short.

Cleaning outside of the printer

A
Remove the paper from the printer.
B
Make sure the printer is turned off and all the
lights are off, and then unplug the power cord
from the electrical outlet.
C
Use a soft, clean cloth to carefully remove any
dust or dirt.
If the dirt does not come off, clean it using a soft,
clean cloth dampened with a mild detergent.
Then, wipe the outside of the printer with a dry,
soft cloth.
Caution:
c
Never use alcohol or thinners to clean the
printer; these chemicals can damage the
components as well as the case.
68