Epson Stylus Pro 9860 User Manual page 43

Epson Stylus Pro 9860
Removing paper after take-up
After paper take-up, follow the steps below to remove
the take-up reel core.
A
Set the Auto switch to Off.
B
Cut the roll paper.
❏ Press the
❏ If the roll paper cannot be cut with the
built-in cutter, use a scissors or cutter sold at
a store.
C
Turn the lever to unlock the movable unit, and
then slide it to the left so that the flange knob
clears the end of the take-up reel core.
While doing this, support the take-up reel core
with one hand to keep it from falling.
User's Guide
Paper Handling
button to cut the roll paper.
D
Remove the take-up reel core from the flange
knob on the movable unit and the drive unit.
Caution:
c
The paper roll is heavy so have two people
hold it by both ends of the paper roll.
43