Epson Stylus Pro 9890 Printer Setups

Hide thumbs Also See for Stylus Pro 9890:

Download this manual

The following instructions demonstrate how to adjust the Epson printer settings to match the Sawgrass

specified configuration. Failure to match your settings may result in poor color output.

1.)

With the printer powered ON, press the Right (Menu) button (see FIGURE 1).

2.)

Press the Right button to select PRINTER SETUP (see FIGURE 2).

3.)

Press the Down button to locate/highlight AUTO NOZZLE CHECK. Press the Right button to select

AUTO NOZZLE CHECK (see FIGURE 3).

Epson Stylus Pro 7890 / 9890

Printer Setup

FIGURE 1

FIGURE 2

FIGURE 3

PAGE 1 of 4 >>

v20130613

Page 1: Printer Setup
Epson Stylus Pro 7890 / 9890 Printer Setup The following instructions demonstrate how to adjust the Epson printer settings to match the Sawgrass specified configuration. Failure to match your settings may result in poor color output. With the printer powered ON, press the Right (Menu) button (see FIGURE 1).
Page 2 Epson Stylus Pro 7890 / 9890 Printer Setup Press the Down button to locate/highlight OFF. Press the OK button to select OFF (see FIGURE 4). A check mark should be visible next to OFF. FIGURE 4 Press the Pause button to return to the default home screen (see FIGURE 5).
Page 3 Epson Stylus Pro 7890 / 9890 Printer Setup Press the Down button to locate/highlight PAPER SETUP. Press the Right button to select PAPER SETUP (see FIGURE 7). FIGURE 7 Press the Right button to select PAPER TYPE (see FIGURE 8).
Page 4 Press the Pause button to return to the default home screen (see FIGURE 11). FIGURE 11 Congratulations! Epson Printer Setup is now complete. Proceed to the Installation Guide for assistance with Profile or Driver installation and registration. PAGE 4 of 4 >>...

Stylus pro 7890