Epson Stylus Pro 9860 User Manual page 54

Epson Stylus Pro 9860
Thin paper
F
Print a paper thickness test pattern.
1. Press the /
PATTERN, and then press the
2. Press the
thickness test pattern.
Example of pattern:
G
Examine the printed pattern to determine which
set of lines are aligned (showing the smallest
gap), and select the THICKNESS NUMBER (from 1
to 15).
1. Press the /
In the case of the illustration above, select 4.
2. Press the
H
Set Paper feed adjustment if necessary.
Set the paper feed amount (- 0.7 to 0.7%).
1. Press the /
FEED ADJUST, and then press the
2. Press the /
amount.
3. Press the
4. Press the button to go back to the previous
menu.
I
Set drying time, if necessary.
You can set the ink drying time for each print
head pass. The range is 0.0 to 10.0 seconds.
1. Press the /
TIME, and then press the
2. Press the /
seconds.
3. Press the
4. Press the button to go back to the previous
menu.
Note:
If the ink blurs on the paper, set a longer time for
ink drying.
User's Guide
Paper Information
NARROW
button to select THICKNESS
button.
button to print the paper
button to select the number.
button.
button to select PAPER
button.
button to set the paper feed
button.
button to select DRYING
button.
button to select the time in
button.
J
Select the paper suction if necessary.
1. Press the
SUCTION, and then press the
2. Press the
setting for the paper.
3. Press the
4. Press the
menu.
K
Select the roll paper tension if necessary.
1. Press the
PAPER TENSION, and then press the
2. Press the
setting for the paper.
3. Press the
4. Press the
menu.
L
Select the remove skew setting if necessary.
1. Press the
SKEW, and then press the
2. Press the
setting for the paper.
3. Press the
4. Press the
menu.
M
After registering the paper settings, press the
button to exit Menu mode.
The custom paper setting is now complete. Start
printing to print on the custom paper you just
set.
To use the registered custom settings, follow the steps
below.
1. Press the button to enter the Menu mode.
2. Press the /
and then press the
3. Press the /
then press the button.
4. Press the /
and then press the
5. Press the /
then press button.
Press the button to exit the Menu mode and then
print the data.
54
/ button to select PAPER
button.
/ button to select a suitable
button.
button to go back to the previous
/ button to select SET ROLL
/ button to select a suitable
button.
button to go back to the previous
/ button to select REMOVE
button.
/ button to select a suitable
button.
button to go back to the previous
button to display PAPER SETUP,
button.
button to select PAPER TYPE, and
button to display CUSTOM PAPER,
button.
button to select media type, and
button.