Epson Stylus Pro 9860 User Manual page 61

Epson Stylus Pro 9860
E
Press the button.
The paper cutter holder stops at the replacement
position.
F
To remove the cover, lower it with the knob, and
pull it low.
G
Screw down the cutter with a screwdriver.
H
Carefully remove the old cutter from the printer.
Warning:
w
Take care not to hurt yourself with the
blade of the cutter. Do not let children
touch the blade.
User's Guide
Maintenance
Note:
Put the used cutter in a bag or the like, and
dispose of it in accordance with local regulations.
I
Take the new paper cutter out of the package and
insert it as shown.
Install the cutter into the cutter holder, setting
the pin of the cutter to the hole of the holder.
J
Screw up the cutter firmly with a cross head
screwdriver.
Note:
Screw up the cutter firmly, otherwise the cut
position may be slightly shifted or skewed.
61