Dmx Mode; Channel Mode - ADJ SABER SPOT RGBW User Instructions

Saber Spot RGBW
Software Update
Please Wait ...
Display Menu
ADJ
SOFTWARE V1.0 3
SN MENU DISPLAY

DMX MODE

1
ADDR ： 001
2 CHANNNEL 4CH RGBW
3 Slave
LOOK
4
Store:01
Reset ？
5
NO
Manual
6 R255 G255 B255 W255
S255
DimCurve
7
Standard
NO DMX
8
Hold
9 White BL
10 TempUnit
11 Temp Val
12 AUTOLOCK
13 IR Active
14 FlipDisplay
ADJ Products, LLC - www.adj.com - Saber Spot RGBW Instruction Manual Page 8
System Menu
FUNCTION DESCRIPTION
Address setting
001- 510
3/4/4/5/6/6/7/8/8/9/11/12CH(see the

channel mode)

SLAVE MODE
Store mode 01- 13
Yes,press ENTER to resume the factory
default setting
MANUAL DIMMER
R000- 255 G 000- 255 B 000- 255 W000- 255
STROBE ：S000- 255
5 kinds Dimmer curve
Standard , Stage, TV, Architec,
Theatre
No DMX
Blackout, Hold, LOOK
WHITE BALANCE R255 G255 B255 W255
TEMP UNIT C/ F
TEMP VALUExxx F
Display keylock OFF/ON
IR setting OFF/ON
Flip display OFF/ON
Saber Spot RGBW
System Menu: When making adjustments press ENTER to
confirm your setup then press and hold the MENU button
for at least 3 seconds. To exit without making any adjust-
ments press the MENU button. The display will lock after 30
seconds, press the MENU button for 3 seconds to unlock.
DMX MODE -
DMX Address Setting.
1. Press the either the MENU, UP, or DOWN buttons until "DMX
MODE" is displayed, press ENTER.
2. The current address will now be displayed and flashing.
Press the UP or DOWN buttons to find your desired address.
Press ENTER to set your desired DMX address.
CHANNEL -
This will let select your desired DMX
channel mode.
1. Press the either the MENU button until "CHANNEL" is dis-
played, press ENTER. The current DMX channel mode will be
displayed.
2. Press the UP or DOWN buttons to find your desired DMX
channel mode and press ENTER to confim and exit.
SLAVE -
This will let you set the unit as the slave in a
master/slave configuration.
1. Press the MENU button until "SLAVE" is displayed, press
ENTER.
LOOK -
In this mode you can run a show mode.
1. Press the MENU button until "LOOK" is displayed, press
ENTER.
2. Use the UP or DOWN buttons to find your desired mode.
ADJ Products, LLC - www.adj.com - Saber Spot RGBW Instruction Manual Page 9
System Menu