Control Panel Lock; Operating Modes; Dmx Mode; Static Color Mode - ADJ 18P Hex User Instructions

18P Hex

Control Panel Lock:

The control panel will lock itself after 30 seconds if nothing is
pressed. To unlock the control panel, press the MODE button
for 3 seconds.

Operating Modes:

The 18P Hex has five operating modes:
• DMX control mode - This function will allow you to control each
individual fixtures traits with a standard DMX 512 controller.
• RGBWA + UV Mode - Choose one of the six colors to remain static
or adjust the intensity of each color to make your own color.
• Sound-Active mode - The unit will react to sound, chasing through
the built in programs. The sound sensitivity is adjustable
• Program Mode - There are 7 built-in programs to choose from.
Color change and color fade speeds are adjustable.
• Static Color Mode - There are 63 colors to choose from.

DMX Mode:

Operating through a DMX controller gives the user the freedom to
create their own programs tailored to their own individual needs. The
18P Hex has 4 DMX modes: 6 Channel mode, 7 Channel mode, 8
Channel mode, and a 12 Channel mode. See pages 14-17 for each
modes DMX traits.
1. This function will allow you to control each individual fixture's
traits with a standard DMX 512 controller.
2. To run your fixture in DMX mode press the MODE button until
"AXXX" is displayed. "XXX" represents the current displayed ad-
dress. Use the UP or DOWN buttons to select your desired DMX
address, then press the ENTER button to select your DMX
Channel mode.
3. Use the UP or DOWN buttons to scroll through the DMX Channel
modes. The Channel modes are listed below:
• To run the 6 Channel Mode, press the MODE button until "CH06"
is displayed. This is the 6 Channel DMX Mode.
• To run the 7 Channel Mode, press the MODE button until "CH07"
is displayed. This is the 7 Channel DMX Mode.
• To run the 8 Channel Mode, press the MODE button until "CH08"
is displayed. This is the 8 Channel DMX Mode.
ADJ Products, LLC - www.adj.com - 18P Hex User Manual Page 8
Operating Instructions 18P Hex
• To run the 12 Channel Mode, press the MODE button until "CH12"
is displayed. This is the 12 Channel DMX Mode.
4. Please see pages 14-17 for DMX values and traits.
5. After you have chosen your desired DMX Channel mode plug in
the fixture via the XLR connections to any standard DMX control-
ler.
RGBWA + UV Dimmer Mode:
In this mode you can adjust the individual colors to make your desired
color.
1. Plug the fixture in and press the MODE button until "rXXX" is dis-
played. You are in Red dimming mode. Press the UP and DOWN
buttons to adjust the intensity. After you have finished adjusting
the intensity, or if you would like to skip to the next color, press
the ENTER button.
2. When "GXXX" is displayed you are in Green dimming mode.
Press the UP and DOWN buttons to adjust the intensity.
3. When "bXXX" is displayed you are in Blue dimming mode. Press
the UP and DOWN buttons to adjust the intensity.
4. When "uXXX" is displayed you are in White dimming mode. Press
the UP and DOWN buttons to adjust the intensity.
5. When "AXXX" is displayed you are in Amber dimming mode.
Press the UP and DOWN buttons to adjust the intensity.
6. When "UXXX" is displayed you are in UV dimming mode. Press
the UP and DOWN buttons to adjust the intensity.

Static Color Mode:

1. Plug the fixture in and press the MODE button until "C-XX" is
displayed. "XX" is the color number currently displayed.
2. There are 63 colors to choose from. Select your desired color by
pressing the UP and DOWN buttons.
ADJ Products, LLC - www.adj.com - 18P Hex User Manual Page 9
Operating Instructions