Cleaning Or Replacing The Lamps On The Right - ergoline BALANCE 440 HYBRID T OLOGY Operating Instructions Manual

Cleaning and maintenance
38/54
– Remove the screws and then remove the lamp cover.
– Please maintain the correct order of the Beauty Light lamps and UV low
pressure lamps.
a: UV low pressure lamps
b: Beauty Light lamps
Replacing lamps: see page 36.
The assembly is the same process in reverse order.
When assembling the device please note:
– Insert the holding bar at the bottom with the hexagon in the recess of the
holding device and align.
DANGER!
Danger of crushing fingers when folding the clamping
strip!
Fingers can be crushed when folding the clamping strip.
– Do not hold fingers between the clamping strip and
acrylic glass panel when folding.
5.10 Cleaning or replacing the lamps on
the right
WARNING!
Acrylic glass panels unusable due to soiling!
Soiling on the panels is burned in by the hot lamps and
results in the long term in unserviceable panels.
– Remove fingerprints and other soiling carefully.