Navigation; Functions - ergoline BALANCE 440 HYBRID T OLOGY Operating Instructions Manual

Operation
Function Button sequence
1. Lamps
5. Vibra Shape
VIBRA
28/54
4.6.1

Navigation

The device is operated with the navigation ring.
Switch on lamps:
Tip the button once.

Switch off lamps/interrupt application:
Hold the button.

Select device function (go to pictogram)
e.g. VOLUME
Select sub-function (if available)
Change setting
The diodes of the available functions and the navigation ring are illuminated in
default mode after starting up the device. After selecting a function, the re-
spective diodes and the navigation ring flash for a few seconds. Settings can
be changed during this time.
Operation – Demonstration mode
– press until
The audio functions and Vibra Shape can be tested in demonstration mode.
You have 30 seconds in which to select the function.
4.7

Functions

Description
START/STOP
Switch the lamps on/off during
tanning (in combination with
Vibra Shape: see below)
Select Vibra Shape (the diode at the
top)
Tip the button once: Vibration

plate will be switched off
Hold the button: Vibration plate

and lamps will be switched off
Programme 1
Programme 2
Programme 3
Programme 4
Information
If the lamps are switched off during tan-
ning, the tanning time continues to run.
START/STOP also switches off the
lamps.