ergoline BALANCE 440 HYBRID T OLOGY Operating Instructions Manual page 97

02/2013 1012946-00
– Remove the screw.
– Fold down the clamping strip.
– Use the suction cup to pull out the panel from the guide.
– Remove the panel to the side and carefully lay it aside.
– Remove the screws and then remove the lamp cover.
– Please maintain the correct order of the Beauty Light lamps and UV low
pressure lamps.
a: UV low pressure lamps
b: Beauty Light lamps
Replacing lamps: see page 36.
The assembly is the same process in reverse order.
DANGER!
Danger of crushing fingers when folding the clamping
strip!
Fingers can be crushed when folding the clamping strip.
– Do not hold fingers between the clamping strip and
acrylic glass panel when folding.
Cleaning and maintenance
Operating instructions – 39/54