Hardware Assembly - Flashforge FINDER Quick Start Manual

1. Take out the filament cartridge in the rear of
Finder, where you will place the filament
spool.
3. Put the filament cartridge back to the Finder. 4. Press the spring presser, and insert the
5. Connect power adapter with the power cable and then insert the power supply into the power
input on the back of the finder. Turn on the power switch and press the touch screen button to
turn on the printer.

Hardware Assembly

2. Insert the filament into the guide tube and
thread the guide tube through the filament
outlet. Place the spool of filament in the
cartridge.
filament into the filament intake. Then release
the spring presser.
05