How to install the Caresse
Dos
Keep the Caresse connected to the AC power at all times.
•
Use an RJ31x jack or connect the Caresse to the first telephone point in the
•
dwelling with all other extensions wired into the unit to ensure proper operation
even when another telephone is in use or off hook.
Don'ts
Expose the Caresse to water or other liquids.
•
Connect cables other than those supplied with the unit.
•
Place your Caresse next to something that makes a lot of noise, such as next to
•
a television, radio or washing machine.
Put it right next to your stove or close to any other heat source.
•
Set the Caresse in a place where it will get damp, such as a bathroom, or near
•
house plants that are sprayed at any time.
Place it very close to any large metal objects, such as microwave ovens, as large
•
pieces of metal stop the signals from the radio pendant reaching the Caresse.
Place your Caresse closer than four feet to something that may emit
•
electromagnetic interference, such as a cordless telephone, CD or video player,
or personal computer.
Step 1 - Connecting the leads and adaptors
Please follow the steps below to plug the cords correctly into the Caresse.
Step A – Plug the telephone cord ⓐ into the
jack on the Caresse labeled LINE and the
first/main telephone wall jack.
Step B – Plug the telephone into the jack on
the Caresse labeled
telephones / equipment into this jack using a
multi socket extension if required (not
supplied). See page 5 for more details.
. Plug all required
Page 6 of 40