Tunstall Caresse Installation And Programming Manual page 28

Setting up via the programming keypad
To record a reminder message, press:
Note: (1-6) represents the message number. If a message is already recorded under the
number entered, this key sequence will replay the message. To re-record a message,
the existing number must be deleted first.
To delete a reminder message, press:
To set a reminder time, press:
To set a reminder time and duration of the reminder, press:
XX is the length of time the user has to press the cancel button to acknowledge the
reminder before the reminder stops and raises a 'Reminder no acknowledge' alarm call
= 00-99 minutes (00 sets default value of 30 minutes).
To erase a reminder time, press:
To erase all reminder times, press:
Then record message
HHMM
HHMM
Page 28 of 40