Features List - Tunstall Caresse Installation And Programming Manual

Features list

Feature
number Feature
(XXX)
010 Pauses & dialing method
012 Prefix number
014 Suffix number
016 Report battery charged
080 Periodic test calls – fixed period
081 Periodic test calls – fixed time
090 Answer with pendant
106 Fast dial button
150 Signal beep using pendant
180 Inactivity monitoring
181 Intruder monitoring
190 Power failure alarm
195 Power restored alarm
200 Personal recipient message
201-203 Reminder messages No. 1-3
204-206 Reminder messages No. 4-6
210 Reminder function
211 Critical visits
Speech message for telephone
220
line/AC power failure
230 Range test
252 CPC protocol
253 CPC (HVS) protocol
254 CPC (code 10) protocol
256 TT92 protocol
980 Keypad lock
990 Reset unit
Default value Notes
2 sec pause, DTMF
See frequently used keypad codes.
Sends a #
Sends alarm call when battery
reaches full power.
Every 24 hours at
time of programming See features explained and
configuring settings.
Every 24 hours at
00:00 hours
Enables user to answer incoming
telephone calls using pendant.
See features explained and
configuring settings.
Enables user to signal a beep to
monitoring center if they cannot
speak.
Continuous Mode 3
See features explained and
with elapsed time of
configuring settings.
16 hrs.
See features explained and
Entry/exit period =
configuring settings (Caresse+
30 sec
only).
Send every 4 hours Sends alarm when power failure
after first hour. occurs.
Sends alarm when power is
restored.
See features explained and
configuring settings.
See features explained and
Reminder chime 30
configuring settings (Caresse+
mins.
only).
Window time set to
60 mins.
Unit provides spoken warning of
telephone line/AC power failure.
Temporarily puts the unit in range
test mode. Press cancel key to exit.
Type of protocol used to
communicate with the monitoring
center.
See frequently used keypad codes.
All features are set to the original
factory settings.
Page 22 of 40