Intruder Monitoring (Caresse+ Only) - Tunstall Caresse Installation And Programming Manual

Intruder monitoring (Caresse+ only)

The Caresse has the ability to provide a simple to use intruder alarm facility, which will
alert the monitoring center or personal recipient on detection of an intruder.
When configured using the keypad, the intruder monitoring function is simplified and
uses a number of default settings. These settings other than the entry/exit times period,
can only be configured using the PC Connect programming tool or via the monitoring
center.
By turning the function ON using the keypad, Intruder monitoring will use the following
settings.
Arm method – press away button, unit announces 'Away' and entry/exit tones will
•
be heard for 30 seconds.
Disarm method – press away button followed by the pendant, unit announces
•
'Home' and entry/exit tones will stop.
To set the entry/exit time period, press:
Where X = 0 (5 seconds), 1 (15s), 2 (30s), 3 (45s), 4 (60s), 5 (90s), 6 (120s), 7 (180s), 8
(240s), 9 (300s).
If an intruder detection event is detected that is within the armed zone(s) and is from an
entry/exit sensor then the entry period will commence and entry tones will sound. The
user has until the entry period expires to disarm the intruder system otherwise an
intruder alarm will be generated.
NOTE: The intruder function can be configured to meet the individual user's need using either the PC
Connect programming tool or via the monitoring center. This enables more complex settings to be
configured including: different arming methods, optional entry/exit tones, how the unit reacts to intruder
detection events (event-based configuration), zoning etc.
Page 25 of 40