The Leds On The Caresse Indicate; The Led On The Pendant Indicates - Tunstall Caresse Installation And Programming Manual

The LEDs on the Caresse indicate

Two LEDs on the Caresse provide indications of its status based on the below.
LED lights
Green LED on
Green LED flash (1 every 4
seconds)
Green LED flash (1 every second)
Red LED flash (2 every second)
Red LED on
Yellow LED on
Yellow LED off
Yellow LED flash (2 every second)
No LED on

The LED on the pendant indicates

When pressed the red LED on the Amie+ or Gem+ pendant will light up. This is to
indicate that the button has been pressed. If the LED flashes when pressed this
indicates that the pendant battery is low and should be replaced.
Home unit status
Normal mode
Normal mode running on battery
(mains power off)
Alarm mode
Telephone line disconnected
Telephone line in use
Away button in away mode
Away button in home mode
Intruder entry/exit time period
Unit powered down (if power is on
and connected then the unit may be
faulty)
Page 10 of 40