Frequently used keypad codes
Locking/Unlocking the keypad
To prevent buttons from being pressed accidentally, the keypad can be locked/unlocked.
Each time the Caresse is programmed, the keypad should be unlocked then locked
again after the programming is completed.
To unlock, press:
To lock, press:
Resetting the Caresse
To reset all previous programmed information press:
Resetting erases all programmed telecare sensors and triggers and all functions are
reset to default settings. The date and time will also need to be reset.
Setting the time
There is a real time 24 hour clock in the Caresse which automatically adjusts to Daylight
Saving Time. To set the clock press:
HH MM
HH represents hours 00-23; 24 cannot be programmed
MM represents minutes 00-59; 60 cannot be programmed
NOTE: The automatic Daylight Saving Time update can only be disabled via the PC Connect programming
tool or the monitoring centre.
Setting the date
DDMMYYYY
Page 13 of 40