User Quick Start - RGBlink MSP 202 User Manual

5.0 User Quick Start

1. Connect one end of the power adapter with the device, the other end into a
socket. Plug in, red power indicator light means the device works normally.
2. How does PC software control the device?
First of all, get the male access of RS 422 interface converter (hereinafter simplified
as an interface converter) linking with RS-232 into MSP 200, the other end into
serial transfer USB cable. Then, connect PC with serial transfer USB cable. (If PC or
control device owns serial ports, the other end of the interface converter can be
directly accessed to the control device.) This can be shown as follows:
Cables connecting RS-232 and RS-422 interface converter:
Interface of the converter
3. Connect MSP 202 with output device;
MSP 202 User Manual
Fig. 5.1 MSP 202 Connection diagram
Male access of RS422
A
B
C
D
F
E
H
G
RGB-RD-UM-M202E001
Cable
①
②
③
④
12