Advertisement
User Quick Start
5.0
C onnect DVI input from source and DVI output to back end device, audio to
1.
audio player;
2.
Connect one end of the power adapter with the device, the other end into a
socket. Plug in, red led light means the device get power, and green on means it got
signal input works.
If user wants to change the mini converter output protocol, for example, from
DVI to HDMI, should check following steps. Defaultly, the converter output as DVI.
3. How does PC software control the device?
When using PC with COM, users can connect the device to PC through cable RJ11 to
DB9.
1) Firstly connect the device by cable RJ11 to DB9, another end to PC or laptop if
with RS232 connector;
2) Double click the software of AVMSP
① Select current small converter Model as MSP 211 in the pull-down.
MSP 211 User Manual
Fig. 5.2 MSP 211 Control Software
Doc No.：RGB-RD-UM-M211E001
, seen as follows:
9
Advertisement
